Showing posts with label biking. Show all posts
Showing posts with label biking. Show all posts

Monday, March 24, 2014

Eneko Elosegui, new to the Pedaling Forward team!

Eneko Elosegui, Triathlete
Eneko Elosegui is a triathlete and has competed in a vast array of races and Ironman's over the world! Thank you Eneko for choosing to work with Pedaling Forward! We share a common belief that cycling shouldn't be all about winning, but should be about the spirit of the sport and lifestyle, and sharing this passion to those around us at the same time. 
Thank you for writing about us! http://iracetri.wordpress.com/

#pedalingforward #enekoelosegui #cycling #ironman #triathlon #passion #love

Wednesday, February 26, 2014

Initial thoughts on: Xero wheels INERTIA TX2

Chris s bike Scott with Xero wheel and Fouriers components
Initial thoughts on: Xero wheels INERTIA TX2 (Original Article Link)
By : Chris Sontag

Packaging: The wheels came in a well protected box in protective sleeves. The skewers, 10 speed freehub body adapter and valve extenders were in bag taped onto the top cover on the wheels. The hubs were protected with plastic caps that were easily removed. 

Installation: The freehub is 11 speed compatible, so I installed the 10 speed washer onto the freehub body and installed my cassette as usual. The skewers were standard skewers with a good aggressive cam action. I chose to mount continental 4000s tires to the wheels. With tire levers they were installed easily. I used inner tubes with 60mm valves, so the valve extenders were not needed. I installed them to test them for thoroughness. The rubber O-rings were found to be a little brittle and would come apart when the valve extender was tightened onto the valve. They still formed a tight bond that allowed the tire to be inflated. 

First Use: The first thing I noticed was the whooshing carbon sound that is expected for those who use carbon wheels. The wheels were happy to be at speed and could hold speed well even on slight inclines. I did find the wheels a little slow to get up to speed from a dead stop. Going up moderate climbs the wheels were able to hold their speed, but the extra weight was noticed as the slope went above 8%. The free hub has good engagement, and has a pleasant sound to it. The spokes were all evenly tensioned and the wheels were true.
The wider rim creates a much larger volume of the tire, which creates more of a semi circle look, compared to a light bulb look on traditional width rims. From my studying of wider rims I knew I should be able to run a lower pressure than normal, so I chose to run 100 psi front and rear. With this pressure the bumps and rough areas in the pavement were notably less harsh compared to my standard width wheels. On the descents the change in the tire profile was most noticeable. The bike easily transitioned from side to side and picked up the roughness of the road, keeping the tires on the ground. I felt much more confident on these wheels than any other wheel I have used. 
The wider profile of the rim and the rounded inner edge provide increased stability in the wind. When the wind gusts come along I would still be pushed, but felt less of a steering force on the front wheel. The rounded edge makes the leading and trailing edges similar to how the wind sees them. Since the wind hits both the leading edge of the wheel, as well as the inner lip on the rear of the wheel, having similar aerodynamic shapes will create similar amounts of lift. Having similar amounts of lift reduces the steering feel the rider feels on the front wheel.

Feedback: The wheels are great for flat or rolling courses. Their weight of 1645 grams is their largest detractor. Losing some weight will greatly increase the wheels performance in my opinion. The O rings provided with the valve extenders have minimal use, if the tube is changed, the o ring is either destroyed, or left on the tube. If there is a way to have the seal be built into the valve extender, it would be more effective. 
The wheels are great, they corner, hold speed and spin great. I am sold on the advantages of the 23mm wide rim. I am ready to switch all of my wheels to 23mm wide!!
XERO Wheel INERTIA TX2 s with Fouriers Brake system

*Content and Images provided by Chris Sontag to Pedaling Forward*

Thursday, February 13, 2014

Walco Hold my Mobile Convertible Handlebar Bag

Walco Hold my Mobile Convertible Handlebar Bag


Seriously, can't get more forward than a name like that for a bag!


Size : 12cmx4.4cmx17.6cm (folded) 
Weight : 280g 
Material : 1680D Nylon, Jacquard, Polyester
Color : Black & Orange

Check them out at: Walco Design






Available to bike shops atPedaling Forward!
Check out our Facebook!

Thursday, February 6, 2014

Airbone's CO2 INFLATOR FOLDING TOOL

Airbone's CO2 INFLATOR FOLDING TOOL 


CO2 INFLATOR FOLDING TOOL (Red / Black)
Smart, light, easy to deploy, and efficient!
Fits both Schrader and Presta Valve
CNC Machined Aluminum Body For Reduced Weight
CO2 INFLATOR INTEGRATED CONSTRUCTION

Specs:
3,4,5 mm HEX KEY WRENCH
+/- SCREWDRIVE
CO2 INFLATOR
SIZE: 61*48*18 mm
WEIGHT: 70 g
COLOR: RED

Available Through Pedaling Forward!
Sign up at : www.pedalingforward.com

Thursday, December 12, 2013

An update is overdue!

An update is long overdue! 

From Taichung Bike Week (search #taichungbikeweek on instagram and facebook) all the way to our visits to bike shops in Canada and Northwestern USA, we haven't been updating on our progress. 

Brand new, not in market yet bicycle products

Before we visited North America, we had prepared a couple of special items to being to show bike shops!
Frames: carbon fiber frames with Apro Tech's newest technology embedded.

Handlebars: UNO's newest line of carbon fiber road and MTB handlebars.

Seatposts: UNO's newest line of Carbon Series seatposts. Simple, clean, and Carbon!

Stem: UNO's newly released 3D forged stem. It's lighter than CNC!

We also took the time to travel to the factories that produce such awesome products for the world of bicycling.

Far from our perception of how bike components are made, these factories are clean and high-tech. Don't let that big iron door fool you, its all camouflage for the real action that happens inside. We expected to see workers sweating, metal burning, and cling of the metals and nails... but once we entered, all we heard was the hums, squeaks, and zaps of the machines creating stuff from nothing but chunks of metal and flames. What's amazing is that this place wasn't mass scale, it was producing a small batch.
Then in a small corner, we find a human!
He is hand-welding a bicycle basket destined for the European market.
He welds, lifts his helmet, inspects his work, and goes back to perfect each imperfection that he finds. that is some dedication.
 This is the raw material: steel tubes.
This will be transformed into bike frames, handlebars, stems, seatposts... you name it.
The cooker: this machine heats metals up so it makes the metal stronger.

There will be a Taichung Bike Week update soon! as well as our most recent visits to Canada and Northwest USA!

in the meantime, be sure to take a look at our Facebook and Instagram!

We are also on Pinkbike.com! Take a look!







Monday, November 4, 2013

Taichung Bike Week 2013



Pedaling Forward will be at Taichung Bike Week from November 6th to November 8th! 
Through our Twitter, Facebook, and Tumblr; we will be updating real-time on what's happening there! From new products to who we meet over there! Be sure to check us out!