Showing posts with label roadbike. Show all posts
Showing posts with label roadbike. Show all posts

Tuesday, June 10, 2014

Taokas Striker Pro being assembled in a bike shop in Taipei, Taiwan!

Below are photos from a bike shop website (Bike Shop)
A Taokas Striker Pro road bike is being assembled in a bike shop in Taipei City, Taiwan! 
Drop dead gorgeous sexy bike.
and its fast as hell as well! 


Taokas Striker Pro in matte Black














Monday, June 9, 2014

DDK R-146 Saddle Review

Initial thoughts on: DDK R-146 Saddle
By : Chris Sontag

Packaging:  No packing was provided
Installation:  This saddle has carbon rails and requires a torque wrench to install it so the carbon is not crushed. Before this saddle I was using a specialized romin pro. I noticed that this saddle has a smaller gap to the seat rail than my previous saddle (figure 1). This smaller gap made it difficult to put the top of the seatpost clamp on the seat rails. It was achieved in only a slightly longer amount of time. The seat rails were slightly tacky, so I opted not to use carbon assembly paste to see how it faired without modification.
First Use: The saddle has an almost identical curved shape to my specialized romin pro (figure 2), so I concluded that the saddle should work fairly well for me. The DDK R-146 saddle has some gel insert padding which is more than my previous saddle (figure 3). Also instead of a cut out in the saddle the majority of the interior of the saddle consists of a soft gel. When you look at the bottom you see that the shell of the saddle is only on the perimeter of the saddle, allowing the soft gel to deform beyond the shell (figure 4).
                  The first ride I found the saddle very cushy. As a road cyclist I prefer a stiff saddle. With the saddle moving each time I pedal I found it not as comfortable as it could be. The saddle was not uncomfortable, but over longer riders I feel that a stiffer saddle would be superior. I also found that having a cut out in the middle of the saddle works better for my body geometry. I will keep riding the saddle, and will see how it progresses, and breaks in.
Feedback:  I think that removing a lot of the excess padding would help the saddle be more comfortable for serious cyclists. I also feel that having a central cut out, will increase comfort.

Figure 1 Visual difference in saddle rail height                    

Figure 1

                                                                                

Figure 2 DDK saddle and Specialized Romin Pro
Figure 2


           Figure 3 DDK R-146 top             



  Figure 4 DDK R-146 bottom

                          
                   

Thursday, May 29, 2014

Chelsea Brown reviews the UNO Carbon Racing Handle Bar and UNO Alloy 3D Stem

Product: UNO Carbon Racing Handle Bar and Alloy 3D Stem AS-025
Model No/Article No: QTS-CR01/QTS-CR01
I am very happy with this carbon handle bar. It is very light and stiff which is important to road racers. Since it is full carbon, it picks up some of the road vibrations as well making rough roads easier on my hands and wrists. I am a sprinter, so I need very stiff components to transfer all of my power to the road. These handle bars are plenty stiff for my sprints. Here is a picture of a recent race I won with the handle bars and stem.
(First Place: Red Kite Criterium #3 on April 13, 2014)



Installation was not so easy. I had to install them twice torqueing them down to the correct amount (5Nm). But, it would not stay in place and was slipping during a race. After trying to tighten them down several times, I tried using carbon paste. This helped a lot, and they have not moved since I used the carbon paste. It might be helpful to package the handle bar with a small set of instructions to let the consumer know to apply carbon paste before installing. They are staying in place very well since using the carbon paste and I have been using these handle bars for about 6 weeks now.
The design is very slick. They look really great.

Installation




Installation

The stem is very light weight and stiff as well. Much lighter than the full carbon Specialized stem that I was using before I switched to the UNO stem. Recently I did a race that is nicknamed the “Paris-Roubaix of California” because the roads are so bumpy that it is comparable to the famous cobblestone race in France. I used all of the UNO components including handlebar, stem, and seat post. These quality components held up very well in the race despite the incredibly bumpy road and all of the pot holes. None of the components came loose when torqued to the appropriate levels. I also noticed a marked improvement in smoothing out the bumpy road using these components. I did this race course last year using a specialized stem and William’s seat post. This time using UNO handlebar and stem my wrists and hands were much less tired and strained than they were last year using other components.

The seat post is very light and stiff as well. I like that the seat post has lines to mark seat position, so that you don’t have to guess when raising or lowering the seat during a ride. The design of all the UNO components is very aggressive looking and looks great on my bike.

Tuesday, March 25, 2014

Initial thoughts on: Fouriers Carbon handlebar

Initial thoughts on: Fouriers Carbon handlebar
By : Chris Sontag

Packaging: The handlebar came in a plastic bag. This is likely due to that it was included in a bulk shipment of other parts. It was comforting to see the quality control sticker on the inside of the handlebar (figure 1). As an engineer I understand the need to have quality controls in place, and I am happy to see them being used by the people at fouriers. 
Installation: The handle bar installed easily, and came labeled with alignment lines and torque values (figure 2). The handlebar comes with grooves for routing brake and shifting cables (figure 3). I found the grooves to be the correct size and position to run my cables from my sram shifters (figure 4). 
First Use: I came from using a set of zipp traditional bend handlebars. These handle bars have more of a ergonomic bend to them (figure 5). The drops are very comfortable, and I can spend as long as I need to in the drops without fatigue in my hands. I found the handlebar to be notably stiffer when sprinting. When I was descending I found the handlebar was stiff, and translated my thoughts into actions on the road.
Feedback: A quality product that I am happy to have on my bike. I look forward to spending more miles on these bars!

Figure 1 Quality control sticker:
Fouriers carbon fiber road bike handlebar Quality Control Sticker inside the handlebar More at www.fouriers-bike.com Photo by Chris Sontag

Figure 2 Alignment lines and torque value:
Fouriers carbon fiber road bike handlebar More at www.fouriers-bike.com Photo by Chris Sontag

Figure 3 Cable routing:
Fouriers carbon fiber road bike handlebar More at www.fouriers-bike.com Photo by Chris Sontag

Figure 4 cables and housing installed:
Fouriers carbon fiber road bike handlebar Cables installed. More at www.fouriers-bike.com Photo by Chris Sontag

Figure 5 handlebar shape:
Fouriers carbon fiber road bike handlebar More at www.fouriers-bike.com Photo by Chris Sontag




Fouriers Website: http://www.fouriers-bike.com

Speedone RT-30 Reynolds Steel Road Bike for the Female Cyclist


Speedone Bike - Taiwan's RT-30 road bike for the female cyclist being exhibited at this year's 2014 Taipei Cycle Show!

We first saw this bike at Taichung Bike Week, and it's good to see Speedone focusing a line of bikes for the female cyclist!

Pink Grip Tape






See more of Speedone on:

Speedone Website 

Speedone Facebook










See more from SpeedOne at: Speedone RT-30 Page! 

Custom Pink Hub!

Pink "S"

Friday, March 21, 2014

Initial thoughts on: Fouriers lightweight stem

Initial thoughts on: Fouriers lightweight stem 
By : Chris Sontag

Packaging: The stem comes in an efficient cardboard package (figure 1). 
Installation: The stem installed easily. It came with torque values clearly labeled, and metric bolts for easy installation (figure 2). 
First Use: With a long stem (130mm) and a light weight stem, stiffness is a concern that I had, which proved unfounded by this stem. I found the stem to be stiff even when I was sprinting. It provided the correct amount of clamping for my handlebar, and did not allow it to slip even on rough roads.
Feedback: The stem is very ascetically pleasing. I really enjoy the cnc machined look to it (figure 3). It was drooled over by my teammates when they first saw it. They are lining up to buy one!

Figure 1 packaging:
Fouriers stem packaging www.fouriers-bike.com


Figure 2 torque values:
Fouriers stem www.fouriers-bike.com



Figure 3 CNC machined features:
Fouriers stem CNC machining detail www.fouriers-bike.com


Check us out on facebook:http://www.facebook.com/pedalingforward

Check out Fouriers at: http://www.fouriers-bike.com

Friday, March 14, 2014

Taokas bikes from 2014 Taipei Cycle Show!

Just a teaser, you can go to our Pinkbike page , Tumblr page, and our Facebook page to check out all the pics and always love comments!

Taokas Archer road bike

Taokas Dumun downhill bike

Taokas booth / Taokas Striker road bike



 
Pinkbike

 Tumblr

Facebook


or...of course, you can use the hashtags: #taokas , #taokasbike , and #taipeicycleshow 
to find more photos!!! 

Thursday, March 13, 2014

Initial Thoughts on: Fouriers Carbon Chain Catcher by Chris Santog


Initial Thoughts on: Fouriers Carbon Chain Catcher
By : Chris Sontag

Packaging: The chain catcher came in a small plastic package along with the mounting hardware and instructions.

Installation: The chain catcher bolts inline with the braze on front derailleur. You place the bolt through a washer, then through the chain catcher, then through a large spacer and the curved spacer for the frame mount, and finally into the front derailleur. Some finesse and trial and error is required to align both the front derailleur and the chain catcher correctly.

First Use: After reinstalling my front derailleur I did not correctly readjust the limits of the front derailleur. Despite this mis-adjustment I never had my chain fall of when shifting!

Feedback: The chain catcher looks fantastic and is very light! If I were to improve the product I would make a way to be able to adjust it separate from the front derailleur. I propose a new part that would allow this.

Figure 1: Installed chain catcher


 Written by: Chris Santog 

Fouriers:

Pedaling Forward: